Help categorize the TRS-80 software archive
Nearly 30,000 programs, and almost none of them say what kind of program they are. Mark whatever you recognize. Pick as many words as fit — a game that teaches arithmetic is Game, Math, Education — then send the page. Everything is reviewed by hand before it goes anywhere near the archive, so a best guess is worth more than a blank.
Important Note: Do not do multiple entries of the same program. If you flag Super Nova by Big Five once, all Super Nova by Big Five entries will get updated. No need to waste your time flagging each Super Nova
Showing only programs with no category yet.
Show everything
← Back
Page 7 of 8 · 740 in this list
· 20,595 programs uncategorized,
69.1% of the archive
Next →
Random
(Storybooks-of-the-Future).jpg)
Look Nod and ShakeMISSING
STORYBOOKS OF THE FUTURE For TRS-80 Models I and III A New Kind of Children's Storybook Poem/Story, + Graphics/Animation . Music/Sound Effects In-Context Learning Games Moon Drops (Counting) Look, Nod & Shake (Imagination Strategies) Fall Out (Number/Letter Identification) PLUS in the 32K Program Automatic Scoring - Hole in the Moon (Alphabet & Number Order) - Moon Looks (Up/Down/Left/Right) Moon Pass (Over/Under/Above/Below) SPECIFY MODEL I OR MODEL III TAPE OR DISK 32K Disk MODELS I/III $24.95 16K Tape MODELS I/III $19.95 Send Check/Money Order to Storybooks of the Future 527 - 41st Avenue San Francisco, CA 94121 (415) 386-5184 (CA Res add 6% Tax) TR-80 is a trademark of Tandy Corp
(Nick-Andrew)[M1].gif)
(-)[CPM][Endless-Loop-Until-Key-Pressed].gif)
(Robert-M-Doerr)[M4].gif)
Loosleaf for SuperLog 4
loosleaf.zip
(Kansas-Software)[M1].gif)
Lord of the Rings
lordring.zip
(-)[M4][Fills-the-Array-with-Values].gif)
(Author-Unknown)[M1][Input-Impedance].gif)
(-)[M1][Fuel-Vitesse-Altitude-Poussee].gif)
(Tom-Hohnstone-and-Mike-Matthews)[M1].gif)
Lost Island
lstislth.zip
(Tom-Johnstone)[M1].gif)
Lost on the Great Barrier Reef
lstbarrr.zip
(Bob-Dallmann)[M1].gif)
Lost on the Moon
lostmoon.zip
(-)[M1][This-is-a-Program-To-Be-Used-to-Try-to.gif)
(Eric-Husted)[M4].gif)
(-)[M4][Ohio-Illinois-Michigan].gif)
(Charles-W-Smith)[M1].gif)
Lottery Pick
lotrypik.zip
(-)[M1][What-Store-Do-You-Want-To-Visit].gif)
(Chuck-Smith)[M4].gif)
Lottery v4 [Enter the Highest Number Used]
lotry4cs.zip
(Jack-E-Willson)[M4][Number-of-Picks-3-8].gif)
Lotto and Sweepstakes Number Picker [Number of Picks 3-8]
lotswppc.zip
(Charles-C-Yost)[M4].gif)
(Danny-O'Reilly)[M4][Checks-Your-Numbers].gif)
Lotto Matching Program [Checks Your Numbers]
lotmtcdo.zip
(-)[M1][Dit-Programma-Leest-De-Lotto].gif)
(-)[M1][Lotto-6-Aus-49].gif)
(-)[M4][How-Many-Dollars-Will-You-Bet].gif)
(Clarence-Owensby)[M4].gif)
(-)[M1][Try-Your-Luck].gif)
(Ed-Bright)[M1].gif)
Lotto Number Selector
lotonosl.zip
(Chris-James)[M1].gif)
Lotto Numbers
lotnmcjb.zip
(Mike-Anderson)[M3].gif)
Lotto Picking Program
lotonopk.zip
(P-G-H)[M1].gif)
Lotto Predictor System
lottopgh.zip
(-)[M4][Do-You-Want-To-Load-Existing-Numbers].gif)
(-)[M1][Free-Air-Resonant-Frequency].gif)
(AU)[M1][Parameters-Vented-Closed-End].gif)
(Computer-Technology-Services)[M4].gif)
Love
lovem4ct.zip
(-)[M1][Enter-Up-To-60-Characters].gif)
(-)[M1][Do-You-Want-a-Calendar].gif)
(Robert-J-Perreault)[M4].gif)
Love Friendship and Caring Test [Question 1 Enter Selection]
lovetst4.zip
(Author-Unknown)[M1][Robert-Indiana].gif)
(-)[M1][Whats-the-Name-of-the-Subject].gif)
(-)[M1][Bessel-Butterworth-Chebyshev].gif)
(Green-Mountain-Software)[M1].gif)
Low Grade Invoicing and Search System
lwgrdiss.zip
(Author-Unknown)[M1][Convert-UC-to-LC-Per-Guidelines].gif)
(-)[M4][xxx-Bytes-Left-in-Driver-Memory].gif)
(-)[M4][1-Look-Here-2-57-Chevy-3.gif)
Low Resolution Animation Demo [1-Look Here 2-57 Chevy 3-Candlelight 4-Excitement 5-Dancer]
lowresan.zip
(Mike-Denny)[M1].gif)
Low Roll
lowrolmd.zip
(R-Baker)[M1][System-Tape-Load-and-Dump].gif)
(Leslie-Mikesell)[M1][Assembled-to-HighMem].gif)
LowDump [Memory Dump Program][Part of LDOS Utility Pack]
lowdmplm.zip
LDOS Users! A special utility package just for YOU: DRIVE-5 Four drives not enough? DRIVE-5 is a memory based disk emulator which allows you to configure a fifth drive IN MEMORY! No moving parts, so access is FAST! In a two drive system, FORMAT and BACKUP can be placed on DRIVE-5 (with /SYS modules) to allow multiple backups with less disk swapping. LOWDUMP LOWDUMP allows you to DUMP files from anywhere in memory, including ROM and video RAM! LOWDUMP allows all parameters as the LDOS DUMP command, including ASCII, for dumping files without loader information present. SYSGEN SYSGEN/CMD allows you to save one or more SYSGEN files as normal /CMD files. Keep several configurations on the same disk and reload as necessary by simply typing the filename. Especially useful when the preferred configuration consumes so much memory that large programs will not execute properly. SYSGEN/CMD may also be executed from a running BASIC program. When the resultant /CMD file is executed, the BASIC program will continue with the next statement, all program variables intact! UNREPAIR Model I TRSDOS cannot read LDOS disks due to the F8 DAM used for directory sectors. UNREPAIR will rewrite the directory track of a single density disk using the FA DAM that will be recognized by Model I TRSDOS. UNREPAIR should run with any Model I DOS and the Radio Shack E/I. An extra BONUS! The TAS LDOS Utility pack includes Z80 source code (on disk) of most of the above utilities (the most informative). The LDOS Utility Pak is $49.95. This package was written by Les Mikesell.
Lower Case Character Driver [Supports Inverse Video and Control Characters]
locachpm.zip
(Bruce-T-Goldman)[M1].gif)
Lower Case Conversion
lcconvbg.zip
(AU)[M1][Modify-Program-So-All-Is-Lower-Case].gif)
(John-R-Olsen-Jr)[M1].gif)
Lower Case Converter
lowcasjo.zip
(Dennis-Wright)[M1].gif)
Lower Case Converter for BASIC Programs v2.0
lccnv2dw.zip
(Robert-B-Koehler)[M1].gif)
Lower Case Descenders for Line Printer VII and DMP-100
lcdescrk.zip
Lower Case Descenders for Line Printer VII and DMP-100 [Level II]
lcdeslp7.zip
(Level-IV-Products).jpg)
Lower Case Driver [68 Bytes]MISSING
Lower Case Driver - Will work with all Model I lower case con- versions. Shortest available, only 68 bytes $ 5.95 For Orders Only 1(800) 521-3305 For Information (313) 525-6200 32461 Schoolcraft Rd., Livonia, Michigan 48150
(Yves-Lempereur)[M1][Ancien-Cablage][Fr].gif)
(Paul-Steinberg)[M1].gif)
Lower Case to Upper Case Conversion [Which File Do You Wish to Convert]
locatops.zip
(-)[M1][Input-File].gif)
(-)[M1][Just-runs].gif)
(San-Mateo-Department-of-Education)[M1].gif)
Lowest Common Denominator Drill
lwsdemdr.zip
(-)[M1][Slow-Lowest-Fast-Not-Always.gif)
(Lance-Micklus)[M1].gif)
(Nick-Andrew)[M1].gif)
(Agricultural-Software-Consultants).jpg)
LP-Disk [Linear Programming]MISSING
Linear Programming LP-Disk solves any linear programming problem with up to 50 variables and 50 constraints (maximize, minimize, less than, greater than, or equal to). The simplex algorithm is in machine language for fast calculation. The program supports full disk I/O features including save the problem on disk, change the problem data and save the last tableau on disk. It offers optional printing of the problem data and the tableaus. All printed output is in a readable format. The solution includes sensitivity analysis (price ranges and shadow prices) and maximum error of solution. LP-Disk runs on any microcomputer with CP/M, one disk drive and 48K of memory, or the Models I and III with one disk drive and 32K memory. Priced at $149.95 for the Model I and III versions and $199.95 for the CP/M version, it is available from Agricultural Software Consultants, 1706 Santa Fe, Kingsville, TX 78363, (512) 595-1937.
(-)[M3][Which-BASIC-Listing-1-4].gif)
NO IMAGE
LPC DriverMISSING
(-)[M1][Subroutine].gif)
(James-Pinakis)[M1].gif)
LPRINT to PRINT Converter
lp2prcjp.zip
(-)[M1][Change-all-Prints-to-LPRINTS].gif)
(Richard-Snow)[M4][LPRINT-from-DOS-to-8-Pin-EPSON-Printers].gif)
LPRINT [LPRINT from DOS to 8 Pin EPSON Printers]
lprint08.zip
LPRINT24 [LPRINT from DOS to 24 Pin EPSON Printers]
lprint24.zip
(Racet-Computes).jpg)
LPSPoolMISSING
'LPSPOOL' LINE PRINTER SPOOLER for the TRS-80 Model I LPSPOOL is a facility which permits concurrent printing and processing. The significant features of LPSPOOL include the following: . Computer 'throughput' is increased by allowing printing to be done while the computer is used for other purposes. Multiple copies of output may be produced automatically, without user program changes. Output may be held until a more convenient time for printing, or deleted if not required. Output may be temporarily stopped, resumed or restarted at any time if printer or paper problems are encountered. Supports parallel or serial printers. Print output is written (spooled) to disk automatically by LPSPOOL, which subsequently prints (despools) the information. All these features are available without changes to a user's program. LPSPOOL includes a 'multi-tasking' monitor which automatically keeps the printer busy (foreground task), while at the same time allows the users program to run (background task). LPSPOOL, acts like an extension to the lineprinter driver. When LPSPOOL is active, print data is directed to spool disk files. As print files are created, their names are inserted in a spool queue. The foreground despooler, also working from a queue, looks for active entries ready for printing. The spool and despool queue may be the same to provide automatic printing as spool files are generated. A set of LPSPOOL commands is provided to control the spool and despool activity. These commands may be entered by the user with the SPOOL library command or by BASIC with the LPRINT command. The LPRINT may be used in an application program or by the user in BASIC direct execution (keyboard) mode. Assembly language programs may also invoke these commands by calls to the line printer driver. An on-line display facility provides a dynamic status display of the LPSPOOL system. LPSPOOL may be used to significantly increase the 'throughput' of the TRS-80. It can be used to save print information in disk files for subsequent and repeated use. This allows multiple copies of output without the necessity of re-running the application programs which generated them. Further, a despool queue can be established which allows unattended operation for long print jobs. Each queue entry allows the specification of spool filename, number of copies, form type, whether the file is to be printed immediately, and whether the queue entry and/or file is to be deleted after printing. ORDER SPOOLER MOD I $75.00
(Automated-Resource-Managment)[M1].jpg)
LPSpool Line Printer SpoolerMISSING
ARM AUTOMATED RESOURCE MANAGEMENT INC. P O Box 4353 Irvine California 92716 LPSPOOL Line Printer Spooler for the Radio Shack TRS-80 Model I Add multi-tasking to your TRS-80 FEATURES: Simultaneous printing and processing Queue mechanism for access of print files Multiple copies of print jobs Use on 2 disk 32KB or 48KB configurations COMPONENTS: 3K Byte assembler language LPSPOOL system Queue maintenance utility Demonstration Program Detailed user manual S39.95 on diskette CA residents add 6 sales tax Dealer inquires are invited
(Author-Unknown)[M4][Usage].gif)
(Misosys)[M4].gif)
(Author-Unknown)[M4][Source-Code].gif)
(Logical-Systems-Inc)[M4].gif)
lds6301j.zip
LSI DELIVERS THE NEXT GENERATION OPERATING SYSTEM FOR YOUR TRS-80 MODEL 4 FROM THE ORIGINAL AUTHOR OF THE MODEL 4 OPERATING SYSTEM LS-DOS 6.3x $29.95 INTRODUCTORY PRICE! Expires March 31, 1987 LS-DOS 6.3 is an update to the TRSDOS 6.x operating system for Tandy TRS-80 Model 4 computers. Due to the continuing popularity of the TRS-80 Model 4, this update was deemed necessary to extend the useful life of the computer through the 1990's. At the same time, many other useful features have been added. Upward compatible with TRSDOS 6.x versions. Expanded date range, 1980 through 1999. Files now have a modification Time Stamp as well as a date. The directory display shows file dates and times. New SVCs for screen print and decimal display. All new, easy to use full screen editor. Conversion program for pre-6.3 version disks adds new time/date information. Automatic date/time conversion when copying from TRSDOS 6.x to version 6.3. One pass format and disk duplication program. Variable and line number cross reference utility for BASIC programs. Many 'user requested' changes/additions/enhancements have been made. Several changes to increase 'user friendliness.' . Many enhancements to BASIC: . Line copy and block move with automatic line reference renumbering. Search and display variable, line numbers, and keywords. Selective block renumbering. High speed load and save. Direct access to DOS SVCs. List next or previous line(s) with a single keystroke. Single letter abbreviations for Auto, Delete, Edit, and List. A documentation update describes all new features and utilities, and contains technical information changes and additions. Since this is an update to TRSDOS 6.2, all customers are expected to have purchased or received and have in their possession a legitimate copy of the TRSDOS 6.x DOS and documentation. To provide support only to legitimate owners, all LS-DOS 6.3 master disks contain an individually encoded customer service ID and serial number. This entitles customers to support directly from LSI. Ordering information: To save COD and handling charges, send a check or money order for $29.95 to: Logical Systems, Inc. PO Box 55235 Grand Junction, CO 81505 Credit card and COD orders call: (303) 243-7070 Mastercard, Visa, and American Express cards are accepted. Credit card and COD orders are $34.95, including shipping and handling. No COD orders accepted outside the United States. No purchase orders or on account orders will be accepted. Orders will be shipped post paid inside the US. Canada and Mexico please add $5.00 for airmail shipping. All other foreign orders, please add $10.00 for air postal shipping. All funds must be in US dollars. Allow 2-4 weeks for delivery. TRS-80 and TRSDOS are Registered Trademarks of Tandy Corporation.
(Logical-Systems-Inc)[M4].gif)
lds6311f.zip
LSI DELIVERS THE NEXT GENERATION OPERATING SYSTEM FOR YOUR TRS-80 MODEL 4 FROM THE ORIGINAL AUTHOR OF THE MODEL 4 OPERATING SYSTEM LS-DOS 6.3x $29.95 INTRODUCTORY PRICE! Expires March 31, 1987 LS-DOS 6.3 is an update to the TRSDOS 6.x operating system for Tandy TRS-80 Model 4 computers. Due to the continuing popularity of the TRS-80 Model 4, this update was deemed necessary to extend the useful life of the computer through the 1990's. At the same time, many other useful features have been added. Upward compatible with TRSDOS 6.x versions. Expanded date range, 1980 through 1999. Files now have a modification Time Stamp as well as a date. The directory display shows file dates and times. New SVCs for screen print and decimal display. All new, easy to use full screen editor. Conversion program for pre-6.3 version disks adds new time/date information. Automatic date/time conversion when copying from TRSDOS 6.x to version 6.3. One pass format and disk duplication program. Variable and line number cross reference utility for BASIC programs. Many 'user requested' changes/additions/enhancements have been made. Several changes to increase 'user friendliness.' . Many enhancements to BASIC: . Line copy and block move with automatic line reference renumbering. Search and display variable, line numbers, and keywords. Selective block renumbering. High speed load and save. Direct access to DOS SVCs. List next or previous line(s) with a single keystroke. Single letter abbreviations for Auto, Delete, Edit, and List. A documentation update describes all new features and utilities, and contains technical information changes and additions. Since this is an update to TRSDOS 6.2, all customers are expected to have purchased or received and have in their possession a legitimate copy of the TRSDOS 6.x DOS and documentation. To provide support only to legitimate owners, all LS-DOS 6.3 master disks contain an individually encoded customer service ID and serial number. This entitles customers to support directly from LSI. Ordering information: To save COD and handling charges, send a check or money order for $29.95 to: Logical Systems, Inc. PO Box 55235 Grand Junction, CO 81505 Credit card and COD orders call: (303) 243-7070 Mastercard, Visa, and American Express cards are accepted. Credit card and COD orders are $34.95, including shipping and handling. No COD orders accepted outside the United States. No purchase orders or on account orders will be accepted. Orders will be shipped post paid inside the US. Canada and Mexico please add $5.00 for airmail shipping. All other foreign orders, please add $10.00 for air postal shipping. All funds must be in US dollars. Allow 2-4 weeks for delivery. TRS-80 and TRSDOS are Registered Trademarks of Tandy Corporation.
(Misosys-Logical-Systems)[M4][MiM-11-043].gif)
ld631h4o.zip
LSI DELIVERS THE NEXT GENERATION OPERATING SYSTEM FOR YOUR TRS-80 MODEL 4 FROM THE ORIGINAL AUTHOR OF THE MODEL 4 OPERATING SYSTEM LS-DOS 6.3x $29.95 INTRODUCTORY PRICE! Expires March 31, 1987 LS-DOS 6.3 is an update to the TRSDOS 6.x operating system for Tandy TRS-80 Model 4 computers. Due to the continuing popularity of the TRS-80 Model 4, this update was deemed necessary to extend the useful life of the computer through the 1990's. At the same time, many other useful features have been added. Upward compatible with TRSDOS 6.x versions. Expanded date range, 1980 through 1999. Files now have a modification Time Stamp as well as a date. The directory display shows file dates and times. New SVCs for screen print and decimal display. All new, easy to use full screen editor. Conversion program for pre-6.3 version disks adds new time/date information. Automatic date/time conversion when copying from TRSDOS 6.x to version 6.3. One pass format and disk duplication program. Variable and line number cross reference utility for BASIC programs. Many 'user requested' changes/additions/enhancements have been made. Several changes to increase 'user friendliness.' . Many enhancements to BASIC: . Line copy and block move with automatic line reference renumbering. Search and display variable, line numbers, and keywords. Selective block renumbering. High speed load and save. Direct access to DOS SVCs. List next or previous line(s) with a single keystroke. Single letter abbreviations for Auto, Delete, Edit, and List. A documentation update describes all new features and utilities, and contains technical information changes and additions. Since this is an update to TRSDOS 6.2, all customers are expected to have purchased or received and have in their possession a legitimate copy of the TRSDOS 6.x DOS and documentation. To provide support only to legitimate owners, all LS-DOS 6.3 master disks contain an individually encoded customer service ID and serial number. This entitles customers to support directly from LSI. Ordering information: To save COD and handling charges, send a check or money order for $29.95 to: Logical Systems, Inc. PO Box 55235 Grand Junction, CO 81505 Credit card and COD orders call: (303) 243-7070 Mastercard, Visa, and American Express cards are accepted. Credit card and COD orders are $34.95, including shipping and handling. No COD orders accepted outside the United States. No purchase orders or on account orders will be accepted. Orders will be shipped post paid inside the US. Canada and Mexico please add $5.00 for airmail shipping. All other foreign orders, please add $10.00 for air postal shipping. All funds must be in US dollars. Allow 2-4 weeks for delivery. TRS-80 and TRSDOS are Registered Trademarks of Tandy Corporation.
(Logical-Systems-Inc)[M4][RS702-2297].gif)
LS-DOS v6.3-FB [Azerty Keyboard][Original]
lsds63fb.zip
LSI DELIVERS THE NEXT GENERATION OPERATING SYSTEM FOR YOUR TRS-80 MODEL 4 FROM THE ORIGINAL AUTHOR OF THE MODEL 4 OPERATING SYSTEM LS-DOS 6.3x $29.95 INTRODUCTORY PRICE! Expires March 31, 1987 LS-DOS 6.3 is an update to the TRSDOS 6.x operating system for Tandy TRS-80 Model 4 computers. Due to the continuing popularity of the TRS-80 Model 4, this update was deemed necessary to extend the useful life of the computer through the 1990's. At the same time, many other useful features have been added. Upward compatible with TRSDOS 6.x versions. Expanded date range, 1980 through 1999. Files now have a modification Time Stamp as well as a date. The directory display shows file dates and times. New SVCs for screen print and decimal display. All new, easy to use full screen editor. Conversion program for pre-6.3 version disks adds new time/date information. Automatic date/time conversion when copying from TRSDOS 6.x to version 6.3. One pass format and disk duplication program. Variable and line number cross reference utility for BASIC programs. Many 'user requested' changes/additions/enhancements have been made. Several changes to increase 'user friendliness.' . Many enhancements to BASIC: . Line copy and block move with automatic line reference renumbering. Search and display variable, line numbers, and keywords. Selective block renumbering. High speed load and save. Direct access to DOS SVCs. List next or previous line(s) with a single keystroke. Single letter abbreviations for Auto, Delete, Edit, and List. A documentation update describes all new features and utilities, and contains technical information changes and additions. Since this is an update to TRSDOS 6.2, all customers are expected to have purchased or received and have in their possession a legitimate copy of the TRSDOS 6.x DOS and documentation. To provide support only to legitimate owners, all LS-DOS 6.3 master disks contain an individually encoded customer service ID and serial number. This entitles customers to support directly from LSI. Ordering information: To save COD and handling charges, send a check or money order for $29.95 to: Logical Systems, Inc. PO Box 55235 Grand Junction, CO 81505 Credit card and COD orders call: (303) 243-7070 Mastercard, Visa, and American Express cards are accepted. Credit card and COD orders are $34.95, including shipping and handling. No COD orders accepted outside the United States. No purchase orders or on account orders will be accepted. Orders will be shipped post paid inside the US. Canada and Mexico please add $5.00 for airmail shipping. All other foreign orders, please add $10.00 for air postal shipping. All funds must be in US dollars. Allow 2-4 weeks for delivery. TRS-80 and TRSDOS are Registered Trademarks of Tandy Corporation.
(Logical-Systems)[M4].gif)
lds630ho.zip
LSI DELIVERS THE NEXT GENERATION OPERATING SYSTEM FOR YOUR TRS-80 MODEL 4 FROM THE ORIGINAL AUTHOR OF THE MODEL 4 OPERATING SYSTEM LS-DOS 6.3x $29.95 INTRODUCTORY PRICE! Expires March 31, 1987 LS-DOS 6.3 is an update to the TRSDOS 6.x operating system for Tandy TRS-80 Model 4 computers. Due to the continuing popularity of the TRS-80 Model 4, this update was deemed necessary to extend the useful life of the computer through the 1990's. At the same time, many other useful features have been added. Upward compatible with TRSDOS 6.x versions. Expanded date range, 1980 through 1999. Files now have a modification Time Stamp as well as a date. The directory display shows file dates and times. New SVCs for screen print and decimal display. All new, easy to use full screen editor. Conversion program for pre-6.3 version disks adds new time/date information. Automatic date/time conversion when copying from TRSDOS 6.x to version 6.3. One pass format and disk duplication program. Variable and line number cross reference utility for BASIC programs. Many 'user requested' changes/additions/enhancements have been made. Several changes to increase 'user friendliness.' . Many enhancements to BASIC: . Line copy and block move with automatic line reference renumbering. Search and display variable, line numbers, and keywords. Selective block renumbering. High speed load and save. Direct access to DOS SVCs. List next or previous line(s) with a single keystroke. Single letter abbreviations for Auto, Delete, Edit, and List. A documentation update describes all new features and utilities, and contains technical information changes and additions. Since this is an update to TRSDOS 6.2, all customers are expected to have purchased or received and have in their possession a legitimate copy of the TRSDOS 6.x DOS and documentation. To provide support only to legitimate owners, all LS-DOS 6.3 master disks contain an individually encoded customer service ID and serial number. This entitles customers to support directly from LSI. Ordering information: To save COD and handling charges, send a check or money order for $29.95 to: Logical Systems, Inc. PO Box 55235 Grand Junction, CO 81505 Credit card and COD orders call: (303) 243-7070 Mastercard, Visa, and American Express cards are accepted. Credit card and COD orders are $34.95, including shipping and handling. No COD orders accepted outside the United States. No purchase orders or on account orders will be accepted. Orders will be shipped post paid inside the US. Canada and Mexico please add $5.00 for airmail shipping. All other foreign orders, please add $10.00 for air postal shipping. All funds must be in US dollars. Allow 2-4 weeks for delivery. TRS-80 and TRSDOS are Registered Trademarks of Tandy Corporation.
(Logical-Systems).jpg)
LS-File ManagerMISSING
LS-FM LS-File Manager will handle all those COPY, MOVE, PURGE or BACKUP jobs with ease. Faster and more versatile than BACKUP or PURGE, FM can also produce a 'script' for later execution through JCL. $49.
(Bob-Haynes)[M4].gif)
LSDOS Assembly Language Filter Tool Programming Utility
lalftpbh.zip
(-)[M1][Moves-a-line-down-the.gif)
(Logical-Systems)[L-70-400][M1].gif)
lsfixds2.zip
45 LSI Catalog L-70-400 FIX Disk II 8970 North 55th Street/P.O. Box 23956/Milwaukee, WI 53223/(414) 355-5454 1984 The LSI Fix Disk II is a compendium of patches to allow various Radio Shack (and other) programs to run under LDOS. These include both patches for normal operation and some operational enhancements. The Fix Disk includes patch files for the following programs: Mod 1 SCRIPSIT v1.0, Mod 3 SCRIPSIT v3.2, Electric Pencil (original version, NOT 2.0z), Mod 1 VisiCalc v1.20z, Mod 3 VisiCalc (the un-Enhanced version), Mod 3 VisiCalc (enhanced versions 150 and 160), RSCOBOL v1.3b, RSBASIC v2.4, Mod 1 MACRO80 v3.43, Mod 1 BASCOM v5.23, Mod 1 FORTRAN v3.42, Mod 3 FORTRAN (only EDIT needs patching), RS Desktop Plan, RS Business Mailing List, and patches for Profile 3+, hard disk version 01.00.00 or 01.00.01, to allow use on the Mod 1 with double density on hard disk or floppy (min. two drives). Most of the Model 1 programs will run on either the Model 1 or 3 under LDOS once patched. This disk and a copy of Model 3 LDOS would prove a very good choice for those moving up from a Model 1 to a Model 4 or 4P.
lsfxdsk2.zip
45 LSI Catalog L-70-400 FIX Disk II 8970 North 55th Street/P.O. Box 23956/Milwaukee, WI 53223/(414) 355-5454 1984 The LSI Fix Disk II is a compendium of patches to allow various Radio Shack (and other) programs to run under LDOS. These include both patches for normal operation and some operational enhancements. The Fix Disk includes patch files for the following programs: Mod 1 SCRIPSIT v1.0, Mod 3 SCRIPSIT v3.2, Electric Pencil (original version, NOT 2.0z), Mod 1 VisiCalc v1.20z, Mod 3 VisiCalc (the un-Enhanced version), Mod 3 VisiCalc (enhanced versions 150 and 160), RSCOBOL v1.3b, RSBASIC v2.4, Mod 1 MACRO80 v3.43, Mod 1 BASCOM v5.23, Mod 1 FORTRAN v3.42, Mod 3 FORTRAN (only EDIT needs patching), RS Desktop Plan, RS Business Mailing List, and patches for Profile 3+, hard disk version 01.00.00 or 01.00.01, to allow use on the Mod 1 with double density on hard disk or floppy (min. two drives). Most of the Model 1 programs will run on either the Model 1 or 3 under LDOS once patched. This disk and a copy of Model 3 LDOS would prove a very good choice for those moving up from a Model 1 to a Model 4 or 4P.
(Logical-Systems)[L-70-400][M1][Rel-821214].gif)
lsfidils.zip
45 LSI Catalog L-70-400 FIX Disk II 8970 North 55th Street/P.O. Box 23956/Milwaukee, WI 53223/(414) 355-5454 1984 The LSI Fix Disk II is a compendium of patches to allow various Radio Shack (and other) programs to run under LDOS. These include both patches for normal operation and some operational enhancements. The Fix Disk includes patch files for the following programs: Mod 1 SCRIPSIT v1.0, Mod 3 SCRIPSIT v3.2, Electric Pencil (original version, NOT 2.0z), Mod 1 VisiCalc v1.20z, Mod 3 VisiCalc (the un-Enhanced version), Mod 3 VisiCalc (enhanced versions 150 and 160), RSCOBOL v1.3b, RSBASIC v2.4, Mod 1 MACRO80 v3.43, Mod 1 BASCOM v5.23, Mod 1 FORTRAN v3.42, Mod 3 FORTRAN (only EDIT needs patching), RS Desktop Plan, RS Business Mailing List, and patches for Profile 3+, hard disk version 01.00.00 or 01.00.01, to allow use on the Mod 1 with double density on hard disk or floppy (min. two drives). Most of the Model 1 programs will run on either the Model 1 or 3 under LDOS once patched. This disk and a copy of Model 3 LDOS would prove a very good choice for those moving up from a Model 1 to a Model 4 or 4P.
(Logical-Systems)[M4].gif)
LSI Technical Help System v6.0 [LD51]
lshlp6tc.zip
45 LSI Catalog LOGICAL SYSTEMS INC. The LSI HELP System 8970 North 55th Street/P.O. Box 23956/Milwaukee, WI 53223/(414) 355-5454 1984 The LSI Help System allows the user to get help regarding the operating system or BASIC easily at DOS Ready, or from inside of most programs. The base HELP system (LDOS HELP) includes three HELP programs, and two different HELP data files. The data files are: LDOS HELP, covering the operating system itself, and BASIC HELP, covering the BASIC supplied with the operating system. Getting help is as easy as typing HELP LDOS SYSTEM [enter]. Help information will now be displayed for the SYSTEM command. HELP will automatically pause between screens until told to continue. The help information may also be sent continuously to the printer. By using one of the two resident HELP programs supplied, help may be requested from inside most programs by pressing the key combination [clear][shift][H]. At this point, the keyword you desire information about may be entered. In addition to user information regarding the operating system, technical help regarding the operating system and Z-80 assembly language programming can be obtained by purchasing the TECHNICAL HELP package. Other than the subject matter, the functions of HELP remain the same. The last element of the HELP system is the HELP Generator. With this package, anyone can produce extra help files that can be used in conjunction with the other two HELP packages. A text editor is required but not included, LED or LSCRIPT (LDOS patched SCRIPSIT) is recommended. For special customization needs, HELP TEXT Source is available. This package contains the text files that were used to produce the data files supplied with the HELP and TECHNICAL HELP systems, and is to be used with the HELP Generator. The LDOS Help package includes a twenty panel, four-color quick reference card for LDOS 5.1 that is also available separately as L-40-060. Because of the vast wealth of information supplied with the HELP system, at least two double-density disk drives are recommended as a minimum system. Catalog # Product Name DOS --- --- --- L-30-060 LDOS HELP 5.1 L-30-080 Technical HELP 5.1 L-30-070 HELP Generator 5.1 L-31-010 HELP text source 5.1 L-30-061 LS-LDOS HELP 6 L-30-081 LS-Technical Help 6 L-30-071 LS-HELP Generator 6 L-31-020 LS-HELP text source 6 L-40-060 Quick Reference Card (included with L-30-060) 5.1 5.1 refers to LDOS 5.1, and 6 refers to TRSDOS 6
-(1982)(Logical-Systems)[L-30-020][M1].gif)
ldosledc.zip
45 LSI Catalog LED - the LSI text EDitor 8970 North 55th Street/P.O. Box 23956/Milwaukee, WI 53223/(414) 355-5454 1984 LED is the LSI text EDitor, and is a screen-oriented editor designed to take full advantage of the LDOS operating environment. It can be used for all types of ASCII files, including program source code (BASIC, TBA, assembler) as well as JCL and KSM files. All LDOS special features work with LED, including type-ahead and KSM. The LED display includes as much of the text as will fit on the screen as well as the file name, current cursor column, the hex value of the character under the cursor and the available memory left for the text buffer. Cursor movement and text scrolling is accomplished by the use of the [arrow] keys and [clear] [arrow] combinations. Text entry includes both insert and overtype modes. A special 'hex' mode can be used to enter any character, even those not normally available from the keyboard. 'Blocks' and 'Block mode commands' allow the speedy manipulation of large text areas. 'Global Search' and 'Search/replace' allow for quick and easy alterations. In addition to the above commands, LS-LED for TRSDOS 6 includes 'write marked-block to disk' and 'insert disk file at cursor' commands. These make the maintenance of 'boiler-plate' material and subroutine libraries very simple. Order L-30-020 for LDOS 5.1, or L-30-021 for TRSDOS 6 (LS-LED).
lsteedls.zip
45 LSI Catalog LED - the LSI text EDitor 8970 North 55th Street/P.O. Box 23956/Milwaukee, WI 53223/(414) 355-5454 1984 LED is the LSI text EDitor, and is a screen-oriented editor designed to take full advantage of the LDOS operating environment. It can be used for all types of ASCII files, including program source code (BASIC, TBA, assembler) as well as JCL and KSM files. All LDOS special features work with LED, including type-ahead and KSM. The LED display includes as much of the text as will fit on the screen as well as the file name, current cursor column, the hex value of the character under the cursor and the available memory left for the text buffer. Cursor movement and text scrolling is accomplished by the use of the [arrow] keys and [clear] [arrow] combinations. Text entry includes both insert and overtype modes. A special 'hex' mode can be used to enter any character, even those not normally available from the keyboard. 'Blocks' and 'Block mode commands' allow the speedy manipulation of large text areas. 'Global Search' and 'Search/replace' allow for quick and easy alterations. In addition to the above commands, LS-LED for TRSDOS 6 includes 'write marked-block to disk' and 'insert disk file at cursor' commands. These make the maintenance of 'boiler-plate' material and subroutine libraries very simple. Order L-30-020 for LDOS 5.1, or L-30-021 for TRSDOS 6 (LS-LED).
LSI Text Editor [LED][Original]
ldosledm.zip
45 LSI Catalog LED - the LSI text EDitor 8970 North 55th Street/P.O. Box 23956/Milwaukee, WI 53223/(414) 355-5454 1984 LED is the LSI text EDitor, and is a screen-oriented editor designed to take full advantage of the LDOS operating environment. It can be used for all types of ASCII files, including program source code (BASIC, TBA, assembler) as well as JCL and KSM files. All LDOS special features work with LED, including type-ahead and KSM. The LED display includes as much of the text as will fit on the screen as well as the file name, current cursor column, the hex value of the character under the cursor and the available memory left for the text buffer. Cursor movement and text scrolling is accomplished by the use of the [arrow] keys and [clear] [arrow] combinations. Text entry includes both insert and overtype modes. A special 'hex' mode can be used to enter any character, even those not normally available from the keyboard. 'Blocks' and 'Block mode commands' allow the speedy manipulation of large text areas. 'Global Search' and 'Search/replace' allow for quick and easy alterations. In addition to the above commands, LS-LED for TRSDOS 6 includes 'write marked-block to disk' and 'insert disk file at cursor' commands. These make the maintenance of 'boiler-plate' material and subroutine libraries very simple. Order L-30-020 for LDOS 5.1, or L-30-021 for TRSDOS 6 (LS-LED).
NO IMAGE
LST-1MISSING
A disassembled listing of Level-1 BASIC with some comments.
(Joe-Vogler)[CPM].gif)
LSweep v1.03 [LBR File Handler][Set 1]
lswep103.zip
LSweep v1.03 [LBR File Handler][Set 2]
lswp103b.zip
(C-B-Falconer)[CPM].gif)
LT [Combination LU and USQ UZQ Library Extractor]
ltluusuz.zip
(C-B-Falconer)[CPM].gif)
LT29 [UnCr UnSq UnLZH UnLBR][Set 1]
ltuuuucb.zip
LT29 [UnCr UnSq UnLZH UnLBR][Set 2]
lt29cbf2.zip